Emial Us :
hongce@iectester.com
اترك رسالة
إذا كنت مهتمًا بمعداتنا وتريد معرفة المزيد من التفاصيل، فيرجى ترك رسالة هنا.سوف نتصل بك في أقرب وقت ممكن.
Guangzhou Hejin Automation Control Technology Co., Ltd. has developed a vacuum chamber helium leak detection system specifically designed for automotive radiator leak detection, offering high-precision and efficient testing to ensure product quality.
رقم الصنف :
henjinالنظام (موك) :
HJ-APAT-002دفع :
Calibration certificate(cost additional)أصل المنتج :
TurkiyePayment Method :
L/C,T/T,PayPalRegular Packaging :
PlywoodHigh Precision Automotive Radiator Helium Leak Detection Equipment
Product Parameters:
|
Parameter |
Details |
|
Product Application Range |
Automotive Radiators |
|
Workpiece Size |
Length: 1000mm, Width: 800mm, Height: 400mm |
|
Number of Vacuum Chambers |
1 |
|
Vacuum Chamber Size |
Length: 1150mm, Width: 900mm, Height: 600mm |
|
Number of Workstations in Vacuum Chamber |
1 |
|
Detectable Leak Rate of the Equipment |
1.0x10⁻⁵ mbar·l/S |
|
Tracing Gas |
Helium |
|
Detection Pressure |
Adjustable down to 600kpa |
|
Large Leak Detection Method |
Positive Pressure Method |
|
Micro - Leak Detection Method |
Helium Mass Spectrometry Analysis |
|
Equipment Cycle Time |
60s/part (including manual loading and unloading time) |
|
Helium Recovery Rate |
≥95% |
|
Vacuum Gauge |
Brand: AGILENT, Model: PVG500 Measurement Range: 5×10⁻⁵ to 1000 mbar (3.75×10⁻⁵ to 750 Torr) Accuracy (N₂): - 1×10⁻³ to 100 mbar (1×10⁻³ to 75 Torr): ±5% of reading - 5×10⁻⁴ to 1×10⁻³ mbar (3.75×10⁻⁴ to 1×10⁻³ Torr): ±50% - 100 to 1000 mbar (75 to 750 Torr): +15% Repeatability (Air): 1×10⁻³ to 100 mbar (1×10⁻³ to 75 Torr) - 2% of reading +2% Output Signal (Measurement Signal): Voltage range 0 - 10.3V (measurement range - specific values vary) |
|
Leak Detector |
Brand: AGILENT, Model: C15 |
|
Touch Screen |
Brand: WEINVIEW, Size: 10″ |
|
PLC |
Brand: OMRON |
|
Vacuum Pump |
Brand: BAOSI (Vacuum chamber evacuation pump), Brand: Feiyue (Workpiece vacuum pump) |
|
Helium Concentration Meter |
Brand: HJ |
|
Standard Leak Hole |
Brand: HJ, Calibrated by the National Institute of Metrology, China (with relevant certificates) |
|
Standard Quick - Connect Fittings |
Compatible with Shuotong pipeline connectors |
|
Indicator Lights |
Equipped |
|
Work Lights |
Equipped |
|
Workstation Alarm Lights |
Equipped |
|
Emergency Stop Button |
Equipped |
|
Pressure Sensor |
Brand: DANFOSS |
|
Software Functions |
Select detection parameter groups, equipment calibration procedures, PLC Mode (Auto/Manual), equipment fault records, production records, touch - screen leak detection screen (parameter setting, production process control, production status monitoring, production data statistics, fault alarm and self - diagnosis, manual maintenance) |
Using helium as the tracing gas, the system first performs a large - leak detection on the workpiece by filling it with high - pressure gas. After that, it evacuates the vacuum chamber and the workpiece. Then, it fills the workpiece with helium at a set pressure and uses a leak detector to precisely detect any micro - leaks. Once the detection is complete, the system recovers the helium and prepares for the next cycle.
إن معدات اختبار إحكام تسرب مطياف كتلة الهيليوم متعددة المحطات المكونة من السيراميك هي أداة اختبار آلية فعالة ودقيقة، تستخدم بشكل رئيسي للكشف عن التسريبات الصغيرة في المنتجات عالية الدقة مثل مكونات السيراميك.
التفاصيل
تعتمد معدات الكشف عن الهيليوم بلوحة التبريد المباشرة للسيارة الكهربائية تقنية الكشف عن تسرب قياس كتلة الهيليوم، والتي تستفيد من الحجم الصغير وقوة الاختراق القوية لجزيئات الهيليوم للكشف عن التسربات الصغيرة للغاية في لوحة التبريد المباشرة.
التفاصيل
The Fabrication Integrity and Initial Bubble Point Testing Apparatus for Filter Media is employed to ascertain the structural integrity of a filter element (by confirming the absence of bubbles) or to pinpoint the location of the largest pore in the filter element by identifying the initial bubble point.
التفاصيل
This equipment is customized for China National Electric Apparatus Research Institute by Guangzhou Hejin Automation Control Technology Co., Ltd. It is mainly used for dry leak detection of split - type air - conditioner evaporators and condensers, aiming to improve production quality and efficiency.
التفاصيل
The plate heat exchanger helium leak detection system of Guangzhou Hejin Automation Control Technology Co., Ltd. (Turkey Branch) is a professional equipment designed and developed for the air tightness detection of plate heat exchangers. It integrates advanced helium leak detection technology and automatic control means, and can accurately locate the leakage point of the plate heat exchanger while ensuring efficient detection, providing a reliable solution for the quality assurance of plate heat exchangers.
التفاصيل
This metal bellows vacuum chamber helium leak detection equipment leverages high-sensitivity technology to identify minute leaks, ensuring the seal integrity of vacuum chambers with metal bellows. This is critical for maintaining the precision of processes and experiments in vacuum environments, where even minor leaks could compromise results.
التفاصيل
Our airtightness testing equipment is specifically engineered for evaluating automobile expansion water tanks. By applying a controlled gas pressure and maintaining constant pressure levels, the system precisely detects pressure drops that indicate leakage, ensuring reliable assessment of seal integrity.
التفاصيل
This helium leak detection device is specifically designed for new energy vehicle direct cooling plates. It offers accurate leakage detection and efficient operation, ensuring the quality and performance of direct cooling plates.
التفاصيلساعات العمل لدينا
الإثنين 21/11 - الأربعاء 23/11: 9 صباحًا - 8 مساءً
الخميس 24/11: مغلق - عيد شكر سعيد!
الجمعة 25/11: 8 صباحًا - 10 مساءً
السبت 26/11 - الأحد 27/11: 10 صباحًا - 9 مساءً
(جميع الساعات بالتوقيت الشرقي)
en
ar
